Filter
Top Products
switch:admin> lscfg --show
Created switches: 128(ds) 1 2(bs)
Port 01234 56789
----------------------------------------------------------------
FID 1|1|1|1|1|128|128|128|128|128|
<output truncated>
switch:admin>
2. Determine any differences between the information in the “SANafter.txt” file
and the information in the “SANbefor.txt” file created earlier. In particular, look
for differences in the following:
v Device types
v Number of devices
v ISL and port states
v Number of switches in the fabric
3. Resolve any issues or unintentional changes to the SAN384B or fabric.
v If there are any mechanical problems, try reseating the associated component.
v If the configuration information is not correct for the system, modify as
required.
v If other issues exist, contact IBM Support
Chapter 5. Removing and installing components 103