Filter
Top Products
About this document
This document describes how to install and service the IBM System Storage
™
SAN384B fabric backbone product. Throughout this document, the product is
referred to as the SAN384B. This document includes information specific to the
SAN384B running Fabric OS version 6.4.0. and later. For information about a Fabric
OS version other than 6.4.0, refer to the documentation specific to your Fabric OS
version.
The sections that follow provide information about:
v “Who should read this document”
v “Product documents”
v “Brocade documents”
v “Accessibility features for SAN384B” on page xxiv
Who should read this document
This document is intended for trained service representatives who are responsible
for installing and servicing the SAN384B, and for network administrators
responsible for maintaining and using the SAN384B.
Product documents
The following documents contain information related to this product. The
documentation may be printed material or may be on the documentation CD that
is shipped with the product.
v IBM System Storage SAN384B Installation, Service, and User Guide, GC52-1333 (this
document, which is also available in accessible HTML format on the
documentation CD)
v IBM Systems Safety Notices, G229–9054
v IBM Systems Environmental Notices and User Guide, Z125-5823
v IBM Warranty
v Implementing an IBM/Brocade SAN with 8 Gbps Directors and Switches, (an IBM
Redbook), SG24-6116
Brocade documents
IBM switches use software licensed from Brocade Communications Systems, Inc.
You can find information related to the software that supports the SAN384B in the
following documents on the CD-ROM supplied with this product:
Brocade Fabric OS
v Fabric OS Administrator's Guide
v Fabric OS Command Reference Manual
v Fabric OS MIB Reference
v Fabric OS Message Reference
v Fabric OS Troubleshooting and Diagnostics Guide
v Fabric OS FCIP Administrator's Guide
v FICON Administrator's Guide
© Copyright IBM Corp. 2009, 2010 xxiii
|
|
|
|
|
|