Filter
Top Products
Chapter 3 Basic Functions
II-47
Table 3-12 Fault Status Reflection
Disk Array Layer Component Layer Individual Component Layer
Pool
Serious Fault
Fault
LD
or
PD
or
Controller
or
Enclosure
Fault
or
Pool
or
LD
or
or
PD
or
Controller
or
Ready
(Maintenance)
or
Ready
(Maintenance)
Enclosure
Attention/Offline/I
nfo
Pool
LD
PD
etc.
Controller
Ready
Ready
etc.
Enclosure
Ready
* Pool-related information is displayed if the disk array to be monitored is a disk array with pool.
1. Displaying of the icon, , in the ready (maintenance) status can be selected by environment setting for the
iSM client. Select [File] → [Environment Settings] from the Menu and check [Display Maintenance State]
from Environment Setting Dialog.
2. If the states of the disk array layer and the component layer (pool) are Ready or Ready (Maintenance) at the
occurrence of threshold excess, the threshold excess icon is displayed. If, however, [Display Maintenance
State] is checked, an icon indicating the resource state is given precedence and displayed.
3. Shape or color tone of the disk array icon varies depending on the type of disk array and the monitoring state.
For further detailed information on the disk array icon, refer to 3.1.3 “Disk Array Information Display” in this
manual.