Filter
Top Products
Chapter 5 Normal Operation
III-57
(10) Display of detailed pool information
If the -pln or -plm option is specified, the system displays detailed information about a specified pool.
#iSMview -pln Storage001 00
--- Pool Detail Information ---
Pool No.(h) : 0000
Pool Name : Pool01
Pool Type : dynamic
RAID Type : RAID6(4+PQ)
Pool State : ready
Expansion State : expanding
Progress Ratio : 75%
Rebuild Time(hour) : 1
Expansion Time(hour) : 2
Pool Capacity : 66.5GB(71,403,831,296Bytes)
Used Pool Capacity : 4.1GB(4,466,933,760Bytes)
Free Pool Capacity : 62.3GB(66,936,897,536Bytes)
PD List(h) : 00-00,01,02,03,04,05
Expanding PD List(h) : 00-07
--- Partition List ---
Start Address(h) End Address(h) Capacity(GB) LDN(h)
--- --- 2.0 0000
--- --- 2.0 0001
--- --- 62.3 free
The display items are as follows:
(1) Pool Detail Information
Displays the detailed information of the specified pool.
Pool No.(h): Pool number
Pool Name: Pool name
Pool Type: Pool type
basic: Basic pool
dynamic: Dynamic pool
RAID Type: RAID type of the pool
Pool State: Pool state
For details, refer to (8) “List of pool information”.
Expansion State: Pool expansion state
---: Pool expansion has not been performed or has terminated normally.
expanding: Pool expansion is in progress.
expand-fail: Pool expansion has failed.
Progress Ratio: Percentage of progress of pool expansion
Rebuild Time(hour): Target time for rebuilding the pool
Expansion Time(hour): Target time for expanding the pool
Pool Capacity: Capacity of the pool
Used Pool Capacity: Space used by the pool
Free Pool Capacity: Free space not used by the pool
PD List(h): List of PDs making up the target pool
Expanding PD List(h): List of expanding PDs