Filter
Top Products
Chapter 5 Normal Operation
III-74
(3) SCSI Socket Information
Displays information about the monitoring server.
SCSI Socket Guard Invalid: Indicates that monitoring by the monitoring server is permitted (on/off).
SCSI Socket Valid IP Address: IP address of the monitoring server that is permitted to perform monitoring
(4) SNMP Information
Displays information about SNMP.
Community Name: Community name
SNMP Trap Transmission IP Address: IP address of the host that transmits SNMP traps
SNMP Valid: Indicates that making SNMP requests is permitted (on/off).
SNMP Valid IP Address: IP address of the host that is permitted to make SNMP requests
(5) Trap Information
Displays information about traps.
Trap Sense Interval: Interval at which traps are monitored
Unit Contact: Management information
Unit Name: System name
Unit Location: Installation location
Unit Info: Other information
* The items (2) Disk Array TCP/IP Information, (3) SCSI Socket Information, (4) SNMP Information, (5) Trap
Information are displayed for only disk arrays that support Network Setting.
* If a specified resource type is wrong or the resource of a specified resource number does not exist, the error message
as shown below is displayed.
iSM11544: Specified Resource does not exist.
(p) Management Processor (MP)
# iSMview -cn Storage002 MP 00h
--- Management Processor Information ---
Type : Management Processor
Abbreviated Name : MP
Number(h) : 00
State : ready
Code : b6-00
The display items are as follows:
(1) Management Processor Information
Displays the detailed information of the management processor.
Type: Resource type (“Management Processor” is displayed.)
Abbreviated Name: Abbreviation of the resource (“MP” is displayed.)
Number(h): Resource number
State: Resource state