Filter
Top Products
Chapter 1 Server Installation
I-22
* In particular, to operate the FTP service under cluster control in cluster environment, you should place the
iSM server and the FTP service in the same fail over group on the local disk.
(xvi) Virtual Directory Path
If using a virtual directory, specify the path for the user, specified for [FTP User Name], to access [Temporary
Folder] through the FTP. The path can be specified with up to 192 bytes.
If [FTP Root Folder] is at a higher level than [Temporary Folder] (or if the folders are identical), [Virtual
Directory Path] need not be specified. The following shows examples:
Example 1: FTP Root Folder: C:\
Temporary Folder: C:\Program Files\NEC\iSMsvr\etc\temp
In this case, the temporary folder can be accessed through the path “/Program
Files/NEC/iSMsvr/etc/temp” in the FTP. Thus, a virtual directory path need not be specified.
Example 2: FTP Root Folder: C:\Program Files\NEC\iSMsvr\etc\temp
Temporary Folder: C:\Program Files\NEC\iSMsvr\etc\temp
In this case, the temporary folder can be accessed through the path “/” that is to the temporary
folder. Thus, a virtual directory path need not be specified.
In other cases, a virtual directory needs to be created and a virtual directory path needs to be specified. The
following shows examples:
Example 3: FTP Root Folder: C:\InetPub\FTPRoot
Temporary Folder: C:\Program Files\NEC\iSMsvr\etc\temp
If a virtual directory is created under the conditions below, specify “/iSMftp” for [Virtual
Directory Path]. In this case, the temporary folder is accessed through the path “/iSMftp” in the
FTP.
Alias: “iSMftp”
Path: “C:\Program Files\NEC\iSMsvr\etc\temp”
Example 4: FTP Root Folder: C:\InetPub\FTPRoot
Temporary Folder: D:\iSM\temp
If a virtual directory is created under the conditions below, specify “/iSMftp2” for [Virtual
Directory Path]. In this case, the temporary folder is accessed through the path “/iSMftp2” in the
FTP.
Alias: “iSMftp2”
Path: “D:\iSM\temp”
Example 5: FTP Root Folder: C:\InetPub\FTPRoot
Temporary Folder: D:\iSM\temp
If a virtual directory is created under the conditions below, specify “/iSMftp3/temp” for [Virtual
Directory Path]. In this case, the temporary folder is accessed through the path “/iSMftp3/temp”
in the FTP.
Alias: “iSMftp3”
Path: “D:\iSM”
* For the path to be specified in creating a virtual directory, be sure to specify the local directory of the
computer on which the iSM server operates. If a network resource or network drive (or a directory under the
drive) is specified, the file transfer function may not operate correctly.
* If specifying a virtual directory path (using a virtual directory), give access permission for both read and write
during creation of the virtual directory.