Filter
Top Products
Chapter 3 Basic Functions
II-7
The component layer displays a list of components and each component’s operating/monitoring state with the
icon.
*1 Pool-related information is displayed if the disk array to be monitored is a disk array with pool.
(c) Individual component layer
It displays the logical disk and physical disk list, and each operating status/monitoring state through icons.
Depending on the environmental setting, the logical disk number or logical disk name is indicated as the
identification information of logical disk. For details on the setting method, refer to 5.2 “Client Start/Stop”.
For the logical disk list, when the snapshot function is used, snapshot-volume (SV) and link-volume (LV) can be
set to non-display. For details on the setting method, refer to 5.2 “Client Start/Stop”.
To display the selected information of a component, right-click on the component and select [Properties].
(6) Information list display area
It displays information on components that is one class lower than the selected class (with left click) in the
configuration display area. If selecting the disk array in the configuration display area, it displays the resource
(“Pool” (*1), “Logical Disk”, “Physical Disk”, “Controller”, “Disk Enclosure”) information composed of the disk
array in the list, and if selecting the logical disk, it displays the information of logical disk in the list.
Displays the following screen according to selected component in the configuration display area.
- Disk Array Subsystem list screen: displays disk array name and operating status
- Component list screen: displays the operating status for each component
- Pool list screen: displays pool name, operating status, and various attribute information.
(*1)
- Logical Disk list screen: displays logical disk name, operating status, and various attribute
information
- Physical Disk list screen: displays operation state of physical disk and various attribute information
- Controller list screen: displays the operation state by component
- Disk Enclosure list screen: displays the operation state for each component
*1 Pool-related information is displayed if the disk array to be monitored is a disk array with pool.
(7) Message display area
Messages that indicate the fault and operating status of the disk array and iSM itself are displayed in this area.
Double-clicking on a message displays the Help information of the message. Refer to the “Messages Handbook”
for the contents of the messages.