Filter
Top Products
Chapter 5 Normal Operation
III-55
attn.(rebuilding): The rebuilding of data is in progress.
attn.(copy back): A spare disk is being copied in redundant state.
attn.(preventive copy): Preventive exchange assignment processing is in progress.
attn.(expanding): Logical expansion processing is in progress.
attn.(expand-fail): A logical expansion error has occurred.
fault: A functional error has occurred.
fault(media error): A medium error has occurred.
* RANK Information is displayed only for other than the disk arrays with pool.
* If no RANKs exist in a specified disk array, the error message as shown below is displayed.
iSM11172:RANK doesn’t exist.
(8) Display of detailed RANK information
If the -rn option is specified, the system displays detailed information about a specified RANK.
#iSMview -rn Storage001 00-00
--- RANK Detail Information ---
RANK No.(h) : 00-00
RaidType : RAID5(4+P)
RebuildTime : 10hour (s)
RANK State : attn.(rebuilding)
RANK Capacity : 66.5GB
Progress Ratio : 12%
PD List(h) : 00-00,01,02,03,04
--- Partition List ---
Start Address(h) End Address(h) Capacity LDN(h)
00000000 00ffffff 8192MB 0000
01000000 0100ffff 32MB free
01010000 01ffffff 8160MB 0002
The display items are as follows:
(1) RANK Detail information
Displays the detailed information of the specified RANK.
RANK No.(h): RANK number
RaidType: RAID type of the RANK
For details, refer to (6) “List of RANK information”.
RebuildTime: Time for rebuilding the RANK
RANK State: RANK state
RANK Capacity: Capacity of the RANK
Progress Ratio: Percentage of progress
The system displays this item only when “RANK State” indicates attn. (rebuilding, copy back,
preventive copy, or expanding), and does not display the item in any other cases.
PD List(h): List of the PDs making up the target RANK