Filter
Top Products
Chapter 5 Normal Operation
III-44
y -en option: Displays detailed information about a specified disk enclosure in a specified disk array.
For details, refer to (18) “Display of detailed information about a specified disk enclosure”.
y -p option: Displays information about the ports of a specified disk array.
For details, refer to (19) “Display of port information”.
y -a option: Displays information about the access control of a specified disk array.
For details, refer to (20) “Display of access control information about a specified disk array”.
y -an option: Displays information about the access control of a specified LD.
For details, refer to (21) “Display of LD access control information”.
y -ap option: Displays information about access control (PORT mode) of a specified port.
For details, refer to (22) “Display of information about port access control (PORT mode)”.
y -aw option: Displays information about the access control (WWN mode) of a specified LD Set.
For details, refer to (23) “Display of information about LD Set Access Control (WWN mode)”.
y -ac option: Displays information about the access control of a specified LD Set.
For details, refer to (24) “Display of information about LD Set Access Control”.
y -ra option: Displays information about LD Administrator of a specified disk array.
For details, refer to (25) “Display of information about LD Administrator of a disk array”.
y -cp option: Displays information about cache partitioning of a specified disk array.
For details, refer to (26) “Display of information about cache partitioning of a disk array”.
y -cpn option: Displays information about cache partitioning of a specified segment number.
For details, refer to (27) “Display of information about cache partitioning of a segment”.
y -cpm option: Displays information about cache partitioning of a specified segment name.
For details, refer to (27) “Display of information about cache partitioning of a segment”.
y -all option: Displays all information about a target disk array.
For details, refer to (28) “Display of all configuration information”.
(1) Display of a disk array list
If only the -d option is specified, the system displays a list of connected target disk array systems.
#iSMview -d
--- Disk Array List ---
Product ID Disk Array Name Resource State Monitoring
S2110 Disk Array Storage001 ready running
S4100 Disk Array Storage002 attn. stop
S4100 Disk Array Storage003 fault stop
(fault)