Filter
Top Products
Chapter 5 Normal Operation
III-12
• -dp option: Used to display relationships of the disk array specified by disk_array. They are displayed after
sorting based on physical disk numbers. When a disk_number is specified, only relationships of
the specified physical disk are displayed.
• -dh option: Used to display relationships of the disk array specified by disk_array. They are displayed after
sorting based on HBTs and LUNs. When an HBT is specified, only relationships of the specified
HBT are displayed. When a LUN is specified, relationships of the specified HBT and LUN are
displayed as well.
• -a option: Used to display all the volume information in the Volume List.
• -al option: Used to display only relationships concerning the logical disk specified to ld_number.
• -ae option: Used to display only relationships concerning the logical disk name specified to ld_name.
• -ad option: Used to display only relationships concerning a drive letter or path name of an NTFS folder
specified to drive or path.
• -ap option: Used to display only relationships concerning the physical disk number specified to disk_number.
• -av option: Used to display only relationships concerning the mount point volume name specified to
volume_name.
• -ah option: Used to display only relationships concerning the Host number, Bus number and target ID
specified to HBT. When LUN is specified, only relationships concerning the specified HBT and
LUN are displayed.
• -ctl option: Used to list the physical disk number and logical disk number of the control volume and the
corresponding disk array name.
The control volume is used to operate the data replication or snapshot function from a business
server. For details on the control volume, refer to manuals for data replication and snapshot.
• -p option: Used to display the version of the Volume List and the created date as the property of the Volume
List.
• -ax option: Used to list the disk array information and all volume information in the Volume List, and the
property information of the Volume List.
• -ver option: Used to display the version information of the volume list command.
• -? option: Used to display the version information and option list of the volume list command.
Each parameter is described below.
disk_array: Disk array name (nickname). Up to 32 ASCII characters can be specified. A part displayed as
“Disk Array” or “Disk Array Name” on the example screen indicates the disk array name.
ld_number: Logical disk number built on the disk array. This can be specified in hexadecimal 0 to fff. If a
character other than “0” to “9”, “a” to “f” and “A” to “F” is input, the parameter format error
will occur. A part displayed as “LDN” on the example screen indicates the logical disk number.
ld_name: Logical disk name (nickname). Up to 24 ASCII characters can be specified. When a disk array
is shipped, the SAA (unique number to identify the disk array) plus a logical disk number are
registered. A part displayed as “LD Name” on the example screen indicates the logical disk
name.