Filter
Top Products
Chapter 3 Basic Functions
II-21
(i) Name
Displays the pool name.
The display contents are the same as (1) “Pool list screen”.
(ii) Pool Number
Displays the pool number.
The display contents are the same as (1) “Pool list screen”.
(iii) Pool Type
Displays the pool type.
Basic: Basic pool
Dynamic: Dynamic pool
(iv) State
Displays the operating state of pool.
The display contents are the same as (1) “Pool list screen”.
(v) Expansion State
Displays the expansion state of pool.
The display contents are the same as (1) “Pool list screen”.
(vi) Progress Ratio
Displays the progress ratio during pool capacity expansion.
(vii) RAID
Displays the RAID type of pool.
The display contents are the same as (1) “Pool list screen”.
For a dynamic pool, displays the configuration ratio of the data disk and the parity disk after the RAID type, like
“6(4+PQ)”.
(viii) Capacity
Displays the capacity of pool.
The display contents are the same as (1) “Pool list screen”.
(ix) Used Capacity
Displays the used capacity of pool.
The display contents are the same as (1) “Pool list screen”.
(x) Logical Disk List
Displays information on the logical disks contained in the target pool (logical disk number, form, logical disk
name, and status).
When the snapshot function is used, snapshot-volume (SV) and link-volume (LV) can be set to non-display.
For details on the setting method, refer to 5.2 “Client Start/Stop”.
Example:
Logic Disk Number OS Type Logical Disk Name State
0000h NX LDNX00000 Ready
0001h A4 LDA400000 Fault