Filter
Top Products
Chapter 1 Server Installation
I-21
(x) FTP Password
Specify the password of the user specified for [FTP User Name].
If using “anonymous” or “ftp” as the FTP user, specify the mail address. The FTP user password can be
specified with up to 58 bytes.
(xi) FTP Password Confirmation
For confirmation, enter the same value as for [FTP Password].
(xii) IP Address of FTP Site
Specify the IP address to be used as the FTP connection destination from the iSM client. If the IP address of
the FTP site is not specified, the system automatically gets the IP address of the iSM server node and uses it as
the FTP connection destination.
Set a suitable IP address in the following cases:
y An IP address is explicitly written in the specification of the IP address of the FTP site.
(Select [Properties] of the FTP site used by iSM → [FTP Site] → [Identification] → [IP Address], in which an
IP address has been specified.)
y The iSM server is used in cluster environment.
In particular, to operate the FTP service in cluster environment, place the iSM server and the FTP service in
the same failover group, and specify a floating (virtual) IP address. To operate the FTP service starting as a
service in cluster environment, specify the real IP address.
* Do not specify “127.0.0.1”, “0.0.0.0”, or “255.255.255.255” as an IP address.
(xiii) Port Number of FTP Site
Specify the port number of the FTP site to be used by iSM.
Select [Properties] of the FTP site used by iSM → [FTP Site] → [Identification] → [TCP Port], in which a port
number has been specified. The port number must be specified here. The default port number is 21.
(xiv) FTP Root Folder
Specify the root folder of the FTP site to be used by iSM.
Select [Properties] of the FTP site used by iSM → [Home Directory] → [FTP Site Directory] → [Local Path],
in which a path has been specified. The path must be specified here. The default root folder is the drive in
which the iSM server is installed. The root folder can be specified with up to 192 bytes.
* If not specifying a virtual directory path:
Select [Properties] of the FTP site used by iSM → [Home Directory] → [FTP Site Directory], in which check
permission for both read and write.
(xv) Temporary Folder
Specify the folder (the local directory of the computer on which the iSM server operates) that is to be used as a
temporary folder when the iSM uses the FTP. If a network resource or network directory is specified, the file
transfer function may not operate correctly.
This folder (drive) needs a free space of 300MB × the number of files concurrently transferred or more. If the
drive containing the iSM server does not have a free space large enough, specify the folder of a drive having a
free space large enough.
If not using the default folder, give the group administrators “Full Control” access authority to the specified
folder and the high-level folders.
Also authorize the user specified for [FTP User Name] to read from and write to the folder specified here.
The default folder is “installation destination folder\etc\temp”. The folder can be specified with up to 192
bytes.