Filter
Top Products
Chapter 3 Basic Functions
II-42
Table 3-9 Display Icons
Icon Status
(Ready)
Component (disk enclosure) is in normal operation.
(Offline)
Component is separated or does not exist
(Fault)
“Fault” occurred in component (If component type is Temperature Alarm, it
indicates temperature abnormalities or sensor fault.)
(Ready)
These icons show that the disk array is in monitoring stop status or under
configuration setting.
(Offline)
This shows monitoring stop status or configuration setting.
If this icon is displayed, any component is disconnected or absent just before
stopping monitoring.
(Fault)
This shows monitoring stop status or configuration setting.
If this icon is displayed, a “Fault” has occurred in any component just before
stopping monitoring. (If the component type is Temperature Alarm,
temperature abnormalities are indicated.)
(ii) Type
Displays the following type information as the component related to disk enclosure at “Type” column.
Table 3-10 List of Components Related to Disk Enclosure
Type Abbreviation
Adapter Card DE_ADP
Power Supply DE_PS
Fan DE_FAN
Temperature Alarm DE_TEMP_ALM
Back Board DE_BB
EC Junction Box EC_JB
(iii) Abbreviated Name (number)
Displays the abbreviation and component number of component related to disk enclosure at “Abbreviated Name
(number)” column. (Table 3-10)
(iv) State
Displays the operating state in any of the following in component related to disk enclosure at “Status” column.
Ready: Component of disk enclosure is in normal operation.
Offline: Component of disk enclosure is separated or does not exist.
Fault: “Fault” occurred in component of disk enclosure.
(If component type is Temperature Alarm, it indicates temperature abnormalities or sensor fault.)