Filter
Top Products
Chapter 5 Normal Operation
III-50
* If no LDs have been bound in a specified disk array, the error message as shown below is displayed.
iSM11173:LD doesn’t exist.
* Refer to 3.3 “Nickname Setting” for details on the settings of OS Type and LD Name (logical disk name).
(4) Display of detailed logical disk information
If the -ln option is specified, the system displays detailed information about a specified logical disk.
#iSMview -ln Storage002 00
--- LD Detail Information ---
LDN(h) : 0000
OS Type : NX
LD Name : nxsvr/c10t0d0
LD Capacity : 2.1GB(2,254,857,830Bytes)
Pool No.(h) : 0000
Pool Name : Pool0000
RaidType : RAID1
LD State : ready
Expansion State : ---
Group : Reserve
Purpose : ---
RPL Attribute : MV
Snapshot Attribute : BV
Current Owner : 00/01
Default Owner : 00
Cache Resident : no
PD List(h) : 00-00,01,02,03
Segment Number(h) : 00
Segment Name : Default
--- LD/Port List ---
Port No.(h) Port Name Port State Port Mode
00-00 10000000000000130100 ready Port
--- LD/WWN List ---
Platform LD Set Name Path Count
WN WIN_SET 2
NX NX_SET 3
--- LD Set List ---
Platform LD Set Name Path Count LD Count
WN WIN_SET 2 2
LX LIN_SET 4 16
The display items are as follows:
(1) LD Detail Information
Displays the detailed information of a specified LD.
LDN(h): Logical disk number
OS Type: Type of OS used with each LD. For details, refer to (3) “List of LD information”.
LD Name: Arbitrary ID information (logical disk name) of each LD, which is obtained from the disk array
LD Capacity: Capacity of the LD