Filter
Top Products
Chapter 3 Basic Functions
II-34
(i) Icon (Operating state/Monitoring state of Physical Disk)
Displays the operating state of physical disk with the icon next to the physical disk number.
Table 3-6 Display Icons
Icon Status
Physical disk is in normal operation
The event whereby “Preventive maintenance” is needed occurred in physical disk.
This shows one alternative physical disk failed and the other alternative physical disk is
used.
The event whereby “Attn” is needed occurred in physical disk
“Fault” occurred in physical disk
These icons show that the disk array is in monitoring stop status or under configuration
setting.
This shows monitoring stop status or under configuration setting.
If this icon is displayed, an event that needs “Preventive maintenance” occurred in any
physical disk just before stopping monitoring.
This shows monitoring stop status or under configuration setting.
If this icon is displayed, an event that needs “Attn” occurred in any physical disk just
before stopping monitoring.
This shows monitoring stop status or under configuration setting.
If displaying this icon, a fault has occurred in any physical disk just before stopping
monitoring.
(ii) Number
Displays the physical disk number in “PD group number (2 hexadecimal digits) - PD number (2 hexadecimal
digits)” at “Number” column.
(iii) State
Displays the operating state of physical disk and the occurrence of event at “State” column in any of the
following.
Ready: Physical disk is in operation
Info (inactive): “Preventive maintenance” occurred in physical disk
Attn.(rebuilding): While re-building the data
Attn.(powering up):While starting up the physical disk
Attn.(formatting): While formatting physically
Fault: “Fault” occurred in physical disk
Offline: Physical disk is separated or does not exist.
(iv) Capacity
Displays the physical disk capacity to one decimal place at most in Gigabyte unit (1G byte=1,073,741,824 byte)
at “Capacity” column. (Truncate less than 2 decimal places. But, 0 byte to 100Megabyte is displayed by 0.1).
(v) RANK/Pool Number
Displays RANK and pool numbers whereby physical disk belongs in “PD group number (2 hexadecimal digits) -
RANK number (2 hexadecimal digits)” at “RANK” column.
* The pool number is displayed only for the disk arrays with pool.