Filter
Top Products
Chapter 3 Basic Functions
II-38
Table 3-7 Display Icons
Icon Status
etc. (Ready)
Component is in normal operation
(Offline)
An event whereby “Attn” is needed occurred in component.
(Fault)
“Fault” occurred in component (If component type is Temperature Alarm, it
indicates abnormal temperatures.)
etc. (Ready)
These icons show that the disk array is in monitoring stop status or under
configuration setting.
(Offline)
This shows monitoring stop status or configuration setting.
If this icon is displayed, any component is disconnected or absent just before
stopping monitoring.
(Fault)
This shows monitoring stop status or configuration setting.
If this icon is displayed, a “fault” has occurred in any component just before
stopping monitoring. (If the component type is Temperature Alarm,
temperature abnormalities are indicated.)
(ii) Type
Displays the type information as component related to controller at “Type” column in the Table 3-8.
Table 3-8 Controller Component List
Type Abbreviation
Host Director HD
Replication Director RD
Disk Director DD
Cache Module CHE
Service Processor SVP
Power Supply DAC_PS
Battery Backup Unit DAC_BBU
Fan DAC_FANU
DAC_FANL
Temperature Alarm DAC_TEMP_ALM
Back Board DAC_BB
BC Junction Box BC_JB
Panel PANEL
Maintenance PC MAINTE_PC
Power Control Card PCC
(iii) Abbreviated Name (number)
Displays the abbreviation and component number of component related to controller at “Abbreviation Name
(number)” column (Table 3-8).