Filter
Top Products
Chapter 5 Normal Operation
III-82
The display items are as follows:
(1) LD/Port List
Lists information about the Access Control (PORT mode) of the specified LD.
Port No.(h): Port number
Port Name: Port name
Port State: Port state
Port Mode: Port mode
* LD/Port List is displayed for only the disk arrays of the 1100/1200/2100/2200/3100/4100 series.
(2) LD/WWN List
Lists information about the Access Control (WWN mode) of the specified LD.
Platform: Platform
LD Set Name: LD Set name
Path Count: Number of paths
* LD/WWN List is displayed for only the disk arrays of the 1100/1200/2100/2200/3100/4100 series.
* If LD/WWN List does not exist, the above information is not displayed.
(3) LD Set List
Lists information about the LD Sets of the specified LD.
Platform: Platform
LD Set Name: LD Set name
Path Count: Number of paths
LD Count : Number of logical disks
* LD Set List is displayed for only the disk arrays of the 100/400/1300/1400/2300/2400/2800/3300/4300 series.
* If LD Set List does not exist, the above information is not displayed.
* A 1-digit number (0) can be specified as a logical disk number.
* If a specified LD does not exist, the error message as shown below is displayed.
iSM11173:LD doesn’t exist.
* Refer to 3.3 “Nickname Setting” for details on the setting of Port Name.