Filter
Top Products
Chapter 5 Normal Operation
III-91
[Snapshot-Pool]: Displays information about pool snapshot.
The display contents are equivalent to those displayed by the -spl/-spln option.
[Controller]: Displays information about the controllers.
The display contents are equivalent to those displayed by the -c/-cn option.
[Enclosure]: Displays information about the disk enclosures.
The display contents are equivalent to those displayed by the -e/-en option.
[Port]: Displays information about the ports.
The display contents are equivalent to those displayed by the -p option.
[Maintenance]: Displays maintenance information for maintenance persons.
[Access Control]: Displays information about the Access Control.
The display contents are equivalent to those displayed by the -a/-an/-ap/-aw/-ac option.
[ReallocationControl]:
Displays information about LD Administrator.
The display contents are equivalent to those displayed by the -ra option.
[Cache Partitioning]:
Displays information about cache partitioning.
The display contents are equivalent to those displayed by the -cp/-cpn option.
Result: Displays the result of specifying the -all option.
Command Completed Successfully!!: Successful
Command Completed Abnormally!!: Unsuccessful
1. Users who have an administrative right and the administrators for iSM are permitted to execute the iSMview
command.
2. Specify a RANK number in format of the RANK’s PDG number and the RANK number that are separated by
a “- (hyphen)”. Specifying only a RANK number results in a parameter error.
3. Specify a PD number in format of the PD’s PDG number and the PD number that are separated by a “-
(hyphen)”. Specifying only a PD number results in a parameter error.
4. Specify a port number in format of the port’s host director number and the port number that are separated by a
“- (hyphen)”.
Specifying only a port number results in a parameter error.
5. Specify an LD Set name in format of the LD Set type and the LD Set name that are separated by a “: (colon)”.
Specifying only an LD Set name results in a parameter error.
6. Specify optional identification information for each LD (logical disk name) in format of the OS type for each
LD and optional identification information for each LD (logical disk name) that are separated by “: (colon)”.
Specifying only optional identification information for each LD (logical disk name) results in a parameter
error.
7. LD number, PD group number, PD number, Pool number, Resource number, Port number, and Cache segment
number are recognized as decimal numbers. When “h” is attached at the end, they are recognized as
hexadecimal numbers.