Filter
Top Products
Chapter 3 Basic Functions
II-36
(i) Number
Displays the physical disk number. The display contents are the same as (1) “Physical Disk list screen”.
(ii) State
Displays the operating state of physical disk and the occurrence of event. The display contents are the same as
(1) “Physical Disk list screen”.
(iii) Capacity
Displays the capacity of physical disk.
(iv) Rotation Speed
Displays the number of rotation (unit: rpm) of target physical disk.
(v) Product ID
Displays the product model name (maximum of 16 characters) information of target physical disk.
(vi) Product Rev
Displays the Product Revision (4 characters) information of target physical disk.
(vii) Serial Number
Displays the product serial number (20 characters) of target physical disk.
(viii) RANK Number/Pool Number
Displays the RANK and pool numbers of physical disk. The display contents are the same as (1) “Physical Disk
list screen”.
* The pool number is displayed only for the disk arrays with pool.
(ix) Pool Name
Displays the name of the pool to which the physical disk belongs.
The display contents are the same as (1) “Physical Disk list screen”.
* The name is displayed only for the disk arrays with pool.
(x) Classification
Displays the classification of physical disk. The display contents are the same as (1) “Physical Disk list screen”.
(xi) Progress Ratio
If the disk array to be monitored is a disk array with pool, displays the progress ratio in the physical disk in which
a rebuilding event occurred.
The display contents are the same as (1) “Physical Disk list screen”.
(xii) Logical Disk List
Displays the logical disk number, form, logical disk name and status which are configured by target physical disk.
For the disk arrays with pool, displays the logical disk number, form, logical disk name, and status of each of the
logical disks contained in the pool to which the target physical disk belongs.
When the snapshot function is used, snapshot-volume (SV) and link-volume (LV) can be set to non-display.
For details on the setting method, refer to 5.2 “Client Start/Stop”.
Example:
Logical Disk Number OS Type Logical Disk Name State
0000h WN KAIKEI Ready
0001h NX KEIRI Fault