Filter
Top Products
Chapter 5 Normal Operation
III-6
(viii) Display Snapshot-volume (SV)
[Display Snapshot-volume] sets whether to display snapshot-volume (SV) when Logical Disk List is displayed on
the main window, the Pool Property screen or the Physical Disk Property screen. The default value is Display.
This setting is enabled after the client is restarted. This setting is not available for the unit without the snapshot
(DynamicSnapVolume) function.
(ix) Display Link-volume (LV)
[Display Link-volume] sets whether to display link-volume (LV) when Logical Disk List is displayed on the
main window, the Pool Property screen or the Physical Disk Property screen. The default value is Display. This
setting is enabled after the client is restarted. This setting is not available for the unit without the snapshot
(DynamicSnapVolume) function.
(x) Logical Disk View Order
[Logical Disk View Order] sets the order in which logical disks are initially displayed on each screen. Select
[Number] or [Name (OS Type+Logical Disk Name)]. This setting changes the order in which columns are
displayed in the logical disk list. This setting is enabled after the client is restarted.
If you click [OK] after the setting is completed, the setting information is saved.
If a connection is added, a shortcut icon for the iSM client is created on the desktop and in the [Start] menu.
(3) Connection
If [File] and [Connection] is selected after environment setting, connection is actually performed for the iSM server.
Figure 5-4 Connection Screen
(i) User name
Input the user name and password which are registered at the setting of the iSM server side.
(ii) Password
User name/password can be saved individually. However, once a user name and a password are saved, any
person other than the registered users can log in the system by using a registered user name and password.
Therefore users must strictly manage the user names and passwords in terms of security.
If you click [OK] here, the current disk array configuration is displayed on the setting information display screen and
the message is displayed in order on the lower fault monitoring screen. If there are disk arrays for which the
BaseProduct license is not unlocked yet, the screen appears listing the disk arrays. (Figure 5-5)