Filter
Top Products
Chapter 3 Basic Functions
II-11
(2) Disk Array Subsystem details information screen
These screens (Figures 3-5, 3-6, and 3-7) are displayed if selecting (click the left button) optional disk array and
selecting by right clicking → [Properties] (or [View]→ [Properties] from menu) in configuration display area and
information list display, displaying detailed information of the disk array.
Figure 3-5 Disk Array Subsystem Details Information-1
(i) Name
The identification information of disk array. The display contents are the same as (1) “Disk Array Subsystem list
screen”.
(ii) Monitoring State
The monitoring state for the disk array. The display contents are the same as (1) “Disk Array Subsystem list
screen”.
When monitoring is waiting for recovery or stopping (failure), unknown causes of the failure on monitoring on
disk array are classified and displayed into the following three.
- Control path failure: Failure caused by control path (network failure, etc.)
- Disk array failure: Internal failure in disk array
- Others: Failure caused by management server
* For details of failures, refer to messages of operation log, etc. output upon a failure.
(iii) State
The integrated operating state for the entire disk array and disk array component. The display contents are the
same as (1) “Disk Array Subsystem list screen”.