Filter
Top Products
90 TASCAM HS-4000
12 – Other functions
Flash start function
Use the flash start function to instantly start playback of takes
that you have designated in advance.
A maximum of 96 takes (2x96 takes in dual player mode) can be
started instantly using a keyboard or devices connected to this
the unit’s remote connectors (REMOTE and PARALLEL).
Setting the flash key function
1. Press the MENU key on the front panel to open the
MENU screen.
2. Touch the
REMOTE SETUP button to open the REMOTE
SETUP
screen.
On the
GENERAL page, set what happens when a flash start
key is pressed, and set whether the two banks of flash start
keys have 12 or 16 buttons each when using the TASCAM
RC–HS32PD remote controller (sold separately) in dual
playlist mode.
For details, see the “GENERAL page” of the “REMOTE SETUP
screen” on page 76.
Selecting the flash page
1. In take mode, select the session that you want to play
back in. (See “Loading sessions” on page 37)
When in playlist mode, select a playlist. (See “Loading
playlists” on page 58.)
2. Use the DATA dial to select the page that contains the
takes or files that you want to play.
When in dual playlist mode, use the SELECT button to
select the current player first.
The first 96 numbered takes or files in the selected session or
playlist can be played back using flash start. The pages
depend on the
RC–HS32PD Flash Start Key Mode and
player mode.
Take or single
playlist mode
Dual playlist mode
Page 16x2 16x2 12x2
1 1–32 1–16 1–12
2 33–64 17–32 13–24
3 65–96 33–48 25–36
4 ― 49–64 37–48
5 ― 65–80 49–60
6 ― 81–96 61–72
7 ― ― 73–84
8 ― ― 85–96
NOTE
When using a TASCAM RC–HS32PD remote controller (sold separately), file
names (or the first parts of long file names) appear on the keys, making it easy
to check the files.
Flash start playback
When the Flash Start Key Method item is set to Flash
Start
, touching a flash start key causes the corresponding take
or file to start playback instantly.
Standby playback
When the Flash Start Key Method item is set to Standby,
if you press a flash start key when stopped, the take or file that
corresponds to that key is put in playback standby and that key
blinks yellow. Following this, pressing the PLAY key will cause
playback to start and the key to become green. During playback,
touching another flash start key will cause the corresponding
take or file to become lined up for playback, and that key will
become yellow. When a take or entry is lined up for playback,
pressing the PLAY key will cause that take to start playing. To
cancel standby, touch the key for the lined up take (yellow key)
again.