Filter
Top Products
TASCAM HS-4000 15
2 − Names and functions of parts
Home Screen
Press the HOME key to open the Home Screen.
In timeline mode
1 ONLINE status indicator
When the online sending mode is ON, the red
icon appears.
When the online sending mode is OFF, the
icon does not appear.
2 Repeat status indication
When repeat playback is ON, the green
icon appears.
When repeat playback is OFF, the icon does
not appear.
3 Time counter (button)
The time displayed is the elapsed time, the remaining time
or the time code time.
Touch this area to change the time display mode.
4 Time mode indicator (button)
This shows the current time display mode. Touch this area
to change the time display mode.
The time elapsed from the beginning of the
timeline is shown.
The time code for the timeline is shown.
5 Time code status button/indicator
When accurate time code is input and recognized
correctly, the TC indicator appears green.
When time code is not recognized correctly, the
TC indicator does not appear.
Synchronized playback status is shown when playback is
ynchronized to timecode. s
The CHASE indicator appears green only
when playback or recording is
synchronized with external timecode or
the built-in timecode generator
(selectable).
§
The CHASE indicator blinks when not
operating with timecode synchronization
(for example, when stopped). This includes
when synchronization is lost during
synchronized playback.
Touch this area to open the
SYNC T/C screen. (See "Sync
and time code settings (SYNC T/C)" on page 73.)
6 Audio synchronization status
button/indicator
When synchronized to a Master clock,
the
SYNC indicator appears green.
§
The
SYNC indicator blinks when not
synchronized to a Master clock.
Touch this area to open the
SYNC T/C screen. (See “Sync
and time code settings (SYNC T/C)” on page 73.)
7 Transport status indicator
This icon shows the current transport status.
Playing back or jogging playback (forward)
Jogging playback (reverse)
Playback standby
Stopped
Searching backward
Searching forward
Searching backward (high-speed search)
Searching forward (high-speed search)
The number shown when searching backward
(shuttle operation) changes with the current
speed: x2, x4, x8, x16, x32.
The number shown when searching forward
(shuttle operation) changes with the current
speed: x2, x4, x8, x16, x32.
Recording
Recording standby
Touch this area to open the PLAY SETUP screen.
8 Session name (button)
This shows the currently active session name.
A “*” appears when the session has not been saved after
editing (including the addition and removal of session
editing marks).
Touch this area to open a pull-down menu.
START TIME EDIT button
This opens the START TIME screen where you can set the
timeline mode starting time. This can only be selected when
stopped.
SAVE button
Save the contents of the session.
This can only be selected when the transport is stopped.
EXPORT AES31 button
This outputs (exports) the session as an AES31 file. This can
only be selected when stopped. (See “Exporting AES31
editing information” on page 46.)
2
3 4
5 6
1
7
8
9
10
11
13
12
19 20 22 23 24
14
15
17
18
16
21