Filter
Top Products
80
Using Play List: Overwrite Editing of Play Lists
Select tracks to overwrite. When V is selected, audio on the
channel other than that selected by video and EXTRA is
overwritten. When V and EXTRA TRACK are selected, all
audio and video tracks are overwritten.
1 Press the MENU button and use the cursor buttons
to choose [SETTING] – [INPUT TRACK].
2 Press the SET button, choose [VIDEO], [EXTRA
AUDIO], and select desired tracks. Then press the
SET button.
◆ NOTE:
•You can also use the INPUT SELECT AUDIO and VIDEO buttons to
select INPUT TRACKS.
•Overwriting takes place only when VIDEO or EXTRA AUDIO is
selected.
•In overwriting, you can use the AUDIO CH menu to switch audio
channel location in overwriting.
➝For details, refer to “Audio Channel Replacement During
Editing” (page 69).
Use the steps below to copy and paste audio registered to an
event to an EXTRA track.
1 Move the cursor to the event you want to copy.
2 Press the A.DUB button to record event audio on the
EXTRA track.
Use the IN and OUT buttons to select the location (R IN/R
OUT) for inserting video from the play list and the location (P
IN/P OUT) for inserting the source video. As soon as three IN
and OUT points are defined the remaining point is
automatically determined and completes registration. When
both IN points are defined, the end of the source clip
automatically becomes the OUT point.
1 Open the play list screen.
2 Play back video to locate the overwrite location.
Use the operation buttons or search dial to play back
video.
3 Register an IN point.
Use the PLAY or STILL button to find a location to insert
audio and video. Then hold down the IN button and press
the ENTRY button.
4 Register an OUT point.
Use the operation buttons or search dial to locate the end
of audio and video. Then hold down the OUT button and
press the ENTRY button.
Setting Tracks for Overwriting
Writing Event Audio to EXTRA Track
Selecting Write Location and Audio/Video to Import
2,3,4 4 5 3
1
Registering the Overwrite Location