Filter
Top Products
Setup: Item Settings
109
Setup
Item Settings
The system menu specifies analog component (HD) output, analog composite output, phase adjustment of audio output, system
frequency, phase of SD REF input of HD output, and system file lock.
* An underlined setting
indicates an initial value.
SYSTEM
Item Setting
Settings and brief function description
FR
No.
SUPER
DISP.
FR
No.
SUPER
DISP.
12 SYS H(HD)
0000
|
1375
|
2750
–1375
|
0
|
1375
Adjusts system phase of analog component (HD) output and HD SDI output (in 13.5 ns
steps).
–: Advances the phase.
+: Delays the phase.
NOTE:
A reset does not return this setting to its factory default.
An item that flashes can be returned to its factory default by pressing the RESET button.
14 SYS SC(SD)
0000
|
0128
|
0255
–128
|
0
|
127
Adjusts the system phase of the analog composite output and SD SDI output (total variable
range: ±180°).
NOTE:
A reset does not return this setting to its factory default.
An item that flashes can be returned to its factory default by pressing the RESET button.
15 SYS H(SD)
0000
|
0864
|
1728
–864
|
0
|
864
Adjusts system phase of analog composite output and SD SDI output (in 37 ns steps).
–: Advances the phase.
+: Delays the phase.
NOTE:
A reset does not return this setting to its factory default.
An item that flashes can be returned to its factory default by pressing the RESET button.
18 SCH COAR(SD)
0000
0001
0002
0003
0
90
180
270
Adjusts the SCH phase of analog composite output (four 90° positions).
19 SCH FINE(SD)
0000
|
0032
|
0064
–32
|
0
|
32
Adjusts the SCH phase of analog composite output (total variable range ±45° or more).
Changes the SC phase but not the H phase.
Covers ±180° in combination with No. 18 SCH COAR(SD).
20 AV PHASE
0000
|
0128
|
0255
–128
|
0
|
127
Adjusts audio output phase relative to video output (in 20.8 µs steps).
–: Advances audio output phase relative to video output.
+: Delays audio output phase relative to video output.
25 SYSTEM FREQ
For AJ-HPM100P Sets system frequency.
0: 59.94Hz
1: 50Hz
NOTE:
Changing this item will only cause the menu item to flash but the setting is not actually
reflected to this unit. For the changes to take effect, turn the power off and turn it back
on again.
0000
0001
59.94
50
For AJ-HPM100E
0000
0001
59.94
50