Filter
Top Products
Using USB Connectors and SD/SDHC Memory Cards: Using This Unit With a Hard Disk
103
Using USB Connectors and SD/SDHC Memory Cards
You can import (loading data from a hard disk to a P2 card)
data in partition units (card units) at high-speed to a P2 card
that has the same capacity as the source card.
1 Insert the P2 card to which the data will be imported.
2 Open the P2 thumbnail screen.
3 Press the MENU button.
4 Use the cursor buttons to select [HDD] – [EXPLORE]
and press the SET button.
5 Select the partition that will be copied and press the
SET button.
6 Press the MENU button.
7 Use the cursor buttons to choose [OPERATION] –
[IMPORT] – [ALL CLIP] and press the SET button.
8 Select the number of the P2 card slot where the
formatted P2 card resides to which the data will be
imported and press the SET button.
9 Select [YES] and press the SET button.
This starts importing. When the import operation ends,
“COPY COMPLETED!” appears.
◆ NOTE:
•When data is imported to a P2 card that differs from the original
P2 card, some clips may become incomplete ( indicator).
Then use the reconnection function to rebuild the clip. Refer to
“Reconnecting Incomplete Clips” (page 48).
•A menu setting allows you to turn verification during copying on
or off.
You can select a hard disk clip and import it to a P2 card.
1 Insert the P2 card where the data will be imported to.
2 Open the hard disk thumbnail screen.
3 Press the MENU button.
4 Use the cursor buttons to select [HDD] – [EXPLORE]
and press the SET button.
5 Select the partition that will be copied and press the
SET button.
6 Select a clip to copy.
7 Press the MENU button.
8 Use the cursor buttons to choose [OPERATION] –
[IMPORT] – [SELECTED CLIPS].
9 Select the number of the P2 card slot that will import
the data and press the SET button.
10 Select [YES] and press the SET button.
This starts importing.
When the import operation ends, the message “COPY
COMPLETED!” appears.
◆ NOTE:
• Verification is not performed when an entire clip is imported.
• The operation of “importing data in clip units” is almost the same
as that of “copying clips.”
➝For cautions to be observed when importing data in clip units,
refer to “Copying Clips” (page 46).
Importing Data from the Hard Disk to a P2 Card
Importing Data in Partition units from TYPE
S Hard Disks and P2 Store
!
Importing Data to a P2 Card in Clip Units