Filter
Top Products
140
For Long and Trouble-Free Operation: Error Messages
If “E- * * ” Iights in the monitor display, hold down the SHIFT button and press the MENU button to open the DIAG-MENU and
read the warning information.
15 BUSY
Displayed while clip information is being read or when clip configuration has
changed. No operations can be performed while this display is on the screen.
[Meaning]
• A card has been inserted or removed.
• Updating is in progress
• Recording post processing is in progress
• Other causes
Operation
continues
BUSY
16 INT SG
Displayed for the first two seconds when the REC button is pressed to enter
the EE mode and the INPUT SELECT VIDEO button or the INPUT SELECT
AUDIO button is set to SG.
Operation
continues
INT SG
17 NO INPUT
Displayed for the first two seconds when the REC button is pressed to enter
the EE mode and the INPUT SELECT button is set to a connector with no
output except for analog audio signals.
Operation
continues
NO INPUT
18 TEXT MEMO
Displayed for two seconds when a text memo is added. Operation
continues
TEXT MEMO
19 MARK ON/OFF
Displayed for two seconds when a shot mark is added or deleted. Operation
continues
MARK ON /
MARK OFF
WARNING information
Priority
Display
Description Deck operation
No Character code
195
INVALID EMBEDDED
TC
Displayed while synching recorded video frames to the time code of a signal input
to the HD SDI connector when that time code is not advancing at 1× normal
speed. (When “SLTC” is selected in menu No. 032 REC REF.)
Operation
continues
2 92 1394 INITIAL ERROR Displayed when the 1394 interface connection is irregular. *4
3 91 COPY PROTECTED
Displayed when DV format recording is available and the copy guard signal input
via the 1394 interface is in the copy inhibit mode.
Recording is
disabled
4 90 NOT 1× 100M SIG
Displayed when a signal input from the 1394 interface is not a DVCPRO HD (100
Mbps) 1× normal speed transfer signal.
Recording is
disabled
5 04 UNKNOWN SIG
Displayed when a signal input from the 1394 interface is not a DVCPRO or DV
format signal.
Recording is
disabled
6 15 NOT 1× DV SIG
Displayed when a signal input from the 1394 interface is not a DV (25 Mbps) 1×
normal speed transfer signal.
Recording is
disabled
7 11 NOT 1× 25M SIG
Displayed when a signal input from the 1394 interface is not a DVCPRO (25 Mbps)
1× normal speed transfer signal.
Recording is
disabled
8 12 NOT 1× 50M SIG
Displayed when a signal input from the 1394 interface is not a DVCPRO50 (50
Mbps) 1× normal speed transfer signal.
Recording is
disabled
9 14 NO MATCH SIG
Displayed when signal input via the 1394 interface differs from the system format
set on this unit.
Recording is
disabled
10 16 INVALID VIDEO SIG
Displayed when the compressed video data of a signal input from the 1394
interface is irregular.
Operation
continues *1
Editing is
disabled
11 17 INVALID AUDIO SIG
Displayed when the audio data of a signal input from the 1394 interface is
irregular.
Operation
continues *2
Editing is
disabled
12 18 INVALID TC SIG
Displayed when the time code data of a signal input from the 1394 interface is
irregular.
Operation
continues *3
Editing is
disabled
Priority Monitor display Description Deck operation
Counter
display