Filter
Top Products
For Long and Trouble-Free Operation: Condensation
137
For Long and Trouble-Free Operation
For Long and Trouble-Free Operation
Condensation
Condensation occurs due to the same principle involved when droplets of water form on a window pane of a heated room. It
occurs when this unit or a card is moved between places where the temperature or humidity varies greatly or when, for instance:
• It is moved to a very humid place full of steam or a room immediately after it has been heated up.
• It is suddenly moved from a cold location to a hot or humid location.
• When moving the unit to locations such as these, leave it standing for about 10 minutes rather than switching on the power
immediately.
• Before starting any maintenance work, switch the power to off and, holding the plug, unplug the cord from the socket.
• Use a soft cloth to clean the outside of this unit.
• For stubborn dirt or stains, wipe the unit with a cloth that has been lightly dampened in well-diluted kitchen detergent and wrung
out thoroughly. After wiping off the dirt with the damp cloth, finish it off with a dry cloth.
◆ NOTE:
• Do not use alcohol, benzene, thinner or any other solvents as they
may discolor or damage the coating of the unit.
Maintenance