Filter
Top Products
For Long and Trouble-Free Operation: Error Messages
141
For Long and Trouble-Free Operation
◆ NOTE:
*1 This warning appears only during recording.
Then the video recording goes black and the audio signal is muted.
*2 This warning appears only during recording. Then the audio is recorded mute.
*3 This warning appears only during recording. The internally generated time code is recorded.
*4 This warning appears at any time. This error disables input to the digital video interface.
*5 “E-50” appears when the backup battery is depleted. Consult your supplier for information on a store that can provide you with a new battery
(CR2032 or the equivalent). Be sure to use setup menu No. 069 (CLOCK SET) to set the clock after battery replacement.
The following warning messages appear when an incorrect operation is attempted in the thumbnail play list screen.
13 26
CARD
ERROR<******>
Displayed when data was corrupted due to a P2 card error during recording.
This error is displayed after recording ends and until the start of the next operation.
This error is not displayed during playback. (* indicates the slot number where the
error occurred.)
Replace the P2 card in the slot where the error occurred.
STOP
14 21 REC WARNING
Displayed when a video or audio error occurs during recording.
To continue operation, turn the power off and then back on again.
STOP
15 50 BATTERY EMPTY
Displayed when a drop in the backup battery voltage for the internal clock is
detected at power on. Replace the internal battery. *5
Operation
continues
16 70
DIR NG
CARD<123456>
Directory structure does not comply with the P2 card standard. Make a quick
backup of card data and format the card.
Operation
continues
17 71
RUNDOWN
CARD<123456>
The P2 card has been rewritten the maximum number of times. You are
recommended to replace the card with a new card.
Operation
continues
18 10 FAN STOP
Displayed when the fan motor stops. Operation
continues
Item Message Description Measure
Thumbnails
CANNOT ACCESS! Data cannot be accessed because it is corrupted
or for other reasons.
Restore media and clips to normal state before
access.
WRITE PROTECTED! The P2 or SD card is write protected. Insert write-enabled media.
CARD FULL! The P2 or SD card is full. Insert media with sufficient capacity.
NO CARD! No P2 or SD card is inserted. Insert compatible media.
CANNOT DELETE! Contents version mismatch prevents deletion. Match devices and contents version.
UNKNOWN
CONTENTS
FORMAT!
Warning displayed to indicate contents version
mismatch.
Match devices and contents version.
CANNOT FORMAT! P2 card problem prevents formatting. Check P2 card.
CANNOT REPAIR! Selected content cannot be repaired. Check selected content.
CANNOT RE-
CONNECT!
A clip that does not span multiple cannot be
reconnected.
Check selected content.
NO INPUT! No data is input. Set after making input.
INVALID VALUE! Entered data was invalid. Enter data in a valid range.
UNKNOWN DATA! The metadata character code is invalid. Use UTF-8 for the metadata character code. Use the
viewer to enter correct characters.
CANNOT REPAIR IN
SELECTION!
Some of the selected clip could not be repaired.
NO SD CARD! No SD card is inserted. Insert an SD card.
NO COPY TO SAME
CARD!
A clip cannot be copied to the card storing the
original clip.
Copy the selected clip to a card that does not contain
the original clip.
SAME CLIP IS
SELECTED!
The selected clips contain multiple copies of the
same clip (duplicated using COPY).
Multiple copies of the same clip (duplicated using
COPY) cannot be simultaneously copied. Deselect all
identical copies from the selected clips.
Priority
Display
Description Deck operation
No Character code