Filter
Top Products
114
Setup: Item Settings
◆ NOTE:
•The clock is accurate to within about ±30 seconds a month with the
power off.
•When the precise time is required, check and reset the time while
the power is on.
This menu allows you to set method for engaging search dial operations, maximum shuttle speed operation, maximum speed of
FF and REW operation, NEXT and PREV seek operations, display of warning messages when REF.VIDEO is not connected, PLAY
delay time, battery type, display of warnings when power is too low, voltage when the power supply is turned off.
* An underlined setting
indicates an initial value.
+07:00 Bangkok
+07:30
+08:00 Beijing
+08:30
+09:00 Tokyo
+09:30 Darwin Islands
+10:00 Guam
+10:30 Lord Howe Island
+11:00 Solomon Islands
+11:30 Norfolk Islands
+12:00 New Zealand
+12:45 Chatham Islands
+13:00
–12:00 Kwajalein Atoll
–11:30
–11:00 Midway Islands
–10:30
–10:00 Hawaii
–09:30 Marquesas Islands
–09:00 Alaska
–08:30
Time difference City/Region
–08:00 Los Angeles
–07:30
–07:00 Denver
–06:30
–06:00 Chicago
–05:30
–05:00 New York
–04:30
–04:00 Halifax
–03:30 Newfoundland
–03:00 Buenos Aires
–02:30
–02:00 Central Atlantic time
–01:30
–01:00 Azores
–00:30
Time difference City/Region
OPERATION
Item Setting
Settings and brief function description
FR
No.
SUPER
DISP.
FR
No.
SUPER
DISP.
100 SEARCH ENA
0000
0001
DIAL
KEY
Specifies method for transferring to the search mode (search dial operation).
Specifies method for transferring to search dial operation.
0: Press the STILL button or turn the search dial to engage search dial operation.
1: Press the STILL button to engage search dial operation.
101 SHTL MAX
0000
0001
0002
0003
0004
×8
×
16
×32
×60
×100
Sets the maximum shuttle speed operation.
0: 8× normal speed
1: 16× normal speed
2: 32× normal speed
3: 60× normal speed
4: 100× normal speed
102 FF.REW MAX
0000
0001
0002
0003
×
32
×60
×100
SEEK
Sets the maximum speed of FF and REW operation.
0: 32× normal speed
1: 60× normal speed
2: 100× normal speed
3: Seek operation to start of clip
NOTE:
•When SEEK is selected, FF and REW operations for FF and REW commands
transferred via 9P and 1394 are performed at 100× normal speed.
•The seek operation is available in STILL and STOP PB mode.