Filter
Top Products
76
PRV-LX1
En
Message Display
7 Messages Displayed in Dialogue Box or Main Unit Display during Recording Operation
Item
Recording
Message
HDD_CAPA is not enough Remaining=
∗∗Kbyte
DVD_CAPA is not enough Remaining=
∗∗Kbyte
This disc is not writable.
There is no disc.
Title num is 99.
No SDI_V Input
No SDI_A Inupt
No AES/EBU Input
No DV Input
Copy Protection
OUT Point must be larger than IN Point +1 sec.
ENCODER ERROR ∗∗∗∗∗∗∗∗
ENCODER ERROR FF000001
ENCODER ERROR FF000002
ENCODER ERROR FF000003
ENCODER ERROR FF000004
ENCODER ERROR FF000005
ENCODER ERROR FFFFFF00
ENCODER ERROR FFFFFF01
ENCODER ERROR FFFFFF02
ERROR ENCODER (main unit display)
Drive error
DRIVE ERROR (main unit display)
Comment
The hard disk drive has insufficient open capacity.
Erase a project, to open enough space on the
hard disk drive for the recording.
The DVD disc has insufficient remaining capacity.
The DVD disc cannot be written to.
No disc has been loaded.
This disc has 99 titles recorded; no additional
titles can be recorded.
There is no SDI Video signal input.
There is no SDI Audio signal input.
There is no AES/EBU signal input.
There is no DV signal input.
The input signal has been copy protected; copying
is not possible.
OUT Point must be larger than IN Point +1 sec.
The leading byte is not FF, and second byte is C8
or above, caused by encoder error. Reboot
system.
Severe map frame number anomaly. Reboot
system.
vro read timeout. Reboot system.
map read timeout. Reboot system.
vro read error. Reboot system.
map read error. Reboot system.
Disagreement of map and vro GOP number
during REC stop. Reboot system.
Disagreement of map and vro file number.
Reboot system.
Disagreement of map and vro file number during
REC stop. Reboot system.
(Appears on main unit display during above
encoder errors).
Drive error encountered. Reboot system.
Drive error encountered. Reboot system.