Filter
Top Products
37
PRV-LX1
En
Recording
The APP section = [Auto Capture] = [IN/OUT
Point] = [Record As] command allows designation of
whether recording enters the REC pause mode, or
stops completely when the OUT point is detected.
When “Chapter (Pause)” is selected, the command
also permits the insertion of a chapter mark at that
point. When manual chapter mark insertion has been
previously selected, optional chapter marks can be
inserted by pressing the ENTER button during
recording. When automatic chapter mark insertion has
been selected, however, a chapter mark is inserted
automatically at regular intervals; in this case, even if
“Chapter (Pause)” is designated, no chapter mark
will be inserted when the unit enters the REC pause
mode. The session from recording start to recording
stop will be considered an independent title (clip).
During recording, the playback video/audio signal will
be output, but when recording is completed, the
screen will return to the Function Menu display.
APP section = [Auto Capture] = [IN/OUT Point]
= [Record As]
7 Edit List (EDL) Recording
The Edit List (EDL) function allows automated
recording of consecutive multiple IN/OUT points by
setting the points on an Edit List (EDL). This recorder
allows formation of an Edit List by using the
contents set with the Function Menu’s APP section
= [Auto Capture] = [IN/OUT Point] command. By
pressing the Add to EDL button, the IN/OUT points
set are added to the edit list.
APP section = [Auto Capture] = [IN/OUT Point]
Adding to EDL
After construction of an edit list, or after loading a
previously recorded edit list, pressing the Function
Menu’s APP section = [Auto Capture] = [EDL
Command] = EDL REC button will cause recording
to be performed automatically in accordance with
the constructed list. In accordance with the recorded
IN/OUT points, the external VTR is automatically
rewound to the designated IN point, and recording
begins automatically. When a designated OUT point
is detected, the unit automatically enters the REC
pause/stop mode.
By using the APP section = [Auto Capture] =
[Chapter Point] command to record chapter point
settings in an edit list, not only REC pause positions,
but chapter marks can also be inserted at optional
points.
APP section = [Auto Capture] = [Chapter Point]
The session from recording start to recording stop is
considered an independent title (clip). During recording
playback video/audio signals are output but when recording
ends, the screen reverts to the Function menu. The final
In/Out point must be recorded as "Title(STOP)" (see Pg 38).