Filter
Top Products
42
PRV-LX1
En
Playing Discs
Basic Operations
7 Operations on the Menu Screen
Some DVD-Video discs are equipped with menu
(selection screen) functions. To select desired titles
and tracks from the menu, use the PRV-LX1’s
CURSOR button to select, and the ENTER button
to confirm the selection.
7 To return to the menu screen during playback
Press the
TOP
MENU
button.
Also, if the
MENU
button is pressed, the menu screen
within the current title will appear.
7 To advance to the next chapter/title
Press the main unit’s SCAN/SKIP FWD button, or
the remote control unit’s
NEXT
button; the playback will
advance immediately to the beginning of the next
chapter or title.
7 To go back to previous chapter/title
Press the main unit’s SCAN/SKIP REV button, or
the remote control unit’s
PREV
button once to return to
the beginning of the currently playing chapter; press
additional times to return to the beginning of previous
chapters. When multiple titles exist on the disc and
this command is executed within the first chapter of
title, playback will return to the top chapter of the title
immediately preceding the current one.
7 Fast Forward
Hold depressed the main unit’s SCAN/SKIP FWD
button, or the remote control unit’s
SCAN
button.
Release the button when near the desired point.
If the remote control unit’s
SCAN
button is pressed and
released once, playback will enter continuous fast
forward mode. Press the
PLAY
button at the point you
with to resume normal playback.
7 Fast Reverse
Hold depressed the main unit’s SCAN/SKIP REV
button, or the remote control unit’s
SCAN
button.
Release the button when near the desired point.
If the remote control unit’s
SCAN
button is pressed and
released once, playback will enter continuous fast
reverse mode. Press the
PLAY
button at the point you
with to resume normal playback.
PLAY
PAUSEDISPLAY
REPEAT
AUDIO SCAN
STEP
RPT A-B
ANGLE
SUBTITLE PREV
NEXT
SETUP
ENTER
RETURN
SEARCH
CLEAR
12
3
456
7
8
9
010
>
TITLE/CHP
FRM/TIME
MENU
TOP
MENU
FRM/TIME
STOP
When a DVD disc has been set for fast play, follow
the instructions to begin playback automatically upon
insertion of the disc. When “DVD1” or “DVD1&2”
is designated, “DVD1” is used. To playback discs on
drive 2, “DVD2” must be designated as the playback
source. During playback, controls on the front panel
and remote control unit act to navigate the DVD in
accordance with the disc’s commands.
Clip Playback (HDD)
When the “HDD” is designated as the playback
source, the PLAY button on the front panel or
remote control unit is used to playback designated
project clips in the order in which they were
recorded. Press the STOP button on the front panel
or remote control unit to end playback.