Filter
Top Products
51
PRV-LX1
En
DVD Menu Editing
DVD Menu Selection
When editing a menu, first use the Function Menu’s
EDIT section = [DVD Menu] = [Menu Design] =
[Design Select] command to choose a basic button
layout pattern from the DVD menu templates
displayed on the screen. Use the 5/∞ buttons to
select the layout pattern type, the 3 button to
change the number of buttons, and the ENTER
button or the 2 button to confirm the selection. The
number and type of buttons which can be placed on
a single page may vary, depending on the layout
patterns available. Also, the following information is
displayed in the window at the bottom of the screen:
DVD Menu’s disc name status OFF and maximum
characters; thumbnails status; and button text status
and maximum characters.
EDIT section = [DVD Menu] = [Menu Design]
= [Design Select]
Thumbnail Selection
When the thumbnail type item is selected, the initial
image of the title (Clip) corresponding to each button
is automatically extracted (first frame of video for each
button), but when the recording has already been
made, the Function Menu's EDIT section [
DVD Menu]>===
[Menu Design]>[Thumbnail] command can be
used to extract the actual recorded image.
When “Go To Video” is selected, the thumbnail
extraction screen appears and the clips are played
back in the order in which they were recorded. While
watching the clip/chapter numbers displayed at the
top of the screen, use the mouse to click on the on-
screen control bar’s SELECT button or press the
ENTER button at the place you wish to use as a
thumbnail.
To assign the selected image as a thumbnail to a button,
press SELECT then skip forward to the next image and
press SELECT again. After all images are selected,
press SAVE. If the CANCEL button is pressed, the image
deselects and the screen returns to the Function Menu.
EDIT section = [DVD Menu] = [Menu Design]
= [Thumbnail]
Thumbnail extraction screen