Filter
Top Products
31
PRV-LX1
En
System Default Settings
System Information
Go to SET UP section = [System] = [Information]
to confirm the following system information:
System version (application version / OS version)
Total power-on time (hours)
Hard disk drive (HDD) access time (hours)
DVD-R/RW Drive read/write time (hours)
SET UP section = [System] = [Information]
HDD Tools
At SET UP section = [System] = [HDD Tools],
functions are provided for formatting and file
checking the video recording area of the built-in hard
disk drive.
Note:
When Format is selected, all projects will be erased.
The Format command erases even those clips in
projects which have been set for accidental erasure
protection using the EDIT section = [Project] =
[Record/Name] = [Protect] command.
SET UP section = [System] = [HDD Tools]
Background Color
Go to SET UP section = [Operation] = [Video
Settings] = [Background Color] to select either
black or blue as the background color when the unit
is in the idling condition.
SET UP section = [Operation] = [Video Settings]
= [Background Color]
Composite/RCA Output
Video output on this unit can be set to either
composite output, RCA output only, or pass-though
of the input signal.
Use the SET UP section = [Operation] = [Video
Settings] = [Composite OUT] command to select
“Source Monitor”.
SET UP section = [Operation] = [Video Settings]
= [Composite OUT]
Note:
When set to “Source Monitor” (pass-through
output), the output will switch to “Decoder Out” if
the OSD is turned on.