Filter
Top Products
44
PRV-LX1
En
7 Slow playback
During normal playback, hold the
STEP
/
STEP
button
depressed.
During slow playback, the playback speed can be
adjusted by pressing the
STEP
and
STEP
buttons.
SLOWER FASTER
STEP
+=
STEP
STEP3 - STEP1 - 1/16 - 1/8 - 1/4 - 1/2 - 1/1
Note 1:
No sound is produced during slow playback.
Note 2:
The slow playback function cannot be used on discs
displaying the “Operation Inhibited” message.
Note 3:
If a still image playback appears shaky, use the
Function Menu’s SET UP section = [Playback] =
[Video] = [Still Mode] command to switch to “Field”.
Note 4:
The slow reverse play and 1/1 forward slow play
function cannot be used during DVD-Video playback
or DVD disc emulation.
7 Repeat Play
During playback of the chapter/title you wish to
repeat, press the
REPEAT
button.
Each time the button is pressed, the unit will alternate
between chapter repeat, title repeat, and repeat OFF.
Note 1:
The repeat playback function cannot be used on discs
displaying the “Operation Inhibited” message.
[Repeat Playback of a Designated Scene]
At the beginning and end points of the scene you
wish to repeat, press the
RPT A-B
button.
Note 2:
Repeat playback cannot span the borders between
titles.
Note 3:
The repeat playback function cannot be used on discs
displaying the “Operation Inhibited” message.
[To Return to a Specific Scene]
1. At the point you will wish to return to, press
the
RPT A-B
button.
2. Later during playback, when you wish to return
to the designated point, press the
PLAY
button.
To stop repeat playback, press the
CLEAR
button.
Note:
The repeat playback function cannot be used on discs
displaying the “Operation Inhibited” message.
7 To change the image angle
During playback of a DVD-Video disc, press the
ANGLE
button.
Each time the button is pressed, the image alternates
between the available angles. With DVD-Video discs
containing multiple recorded angles of view, the angle
can be switched as desired during playback.
Such discs are marked by the angle mark (
) on the
jacket.
7 To Change the Subtitle Setting During
Playback
During playback of a DVD-Video disc, press the
SUBTITLE
button.
Each time the button is pressed, the subtitle display
setting alternates between those available.
If multiple language subtitles are recorded on the disc,
the subtitle can be selected from among those
recorded. Some DVD-Video discs also allow subtitle
selection from the disc’s onscreen menu. In this case,
display the menu by pressing the
MENU
button and select
the desired subtitle setting directly from the menu.
When playing a DVD-Video disc, the subtitle setting
selected here is temporary. When playback is
stopped, the subtitle setting reverts to the default
selected using the SET UP section
=
[Playback]
=
[Language]
=
[Subtitle] command.
7 To Change Audio During Playback
During playback of a DVD-Video disc, press the
AUDIO
button.
Each time the button is pressed, the audio alternates
between those available.
If multiple language soundtracks have been recorded
on the disc, the language can be selected from
among those recorded. Some DVD-Video discs also
allow language selection from the disc’s onscreen
menu. In this case, display the menu by pressing the
MENU
button and select the desired language setting
directly from the menu.
When playing a DVD-Video disc, the language setting
selected here is temporary. When playback is
stopped, the language setting reverts to the default
selected using the SET UP section
=
[Playback] =
[Language] = [Audio] command.
PLAY
PAUSEDISPLAY
REPEAT
AUDIO SCAN
STEP
RPT A-B
ANGLE
SUBTITLE PREV
NEXT
SETUP
ENTER
RETURN
SEARCH
CLEAR
12
3
456
7
8
9
010
>
TITLE/CHP
FRM/TIME
MENU
TOP
MENU
FRM/TIME
STOP
Playing Discs