Filter
Top Products
45
PRV-LX1
En
Playing Discs
Note 1:
During time shift playback, the PLAY button enable
start time will differ depending on the video rate and
the audio encoding format, as shown in the following
table.
Note 2:
The interval required from the time the PLAY button
is pressed until playback actually begins is about 10
seconds.
Note 3:
The minimum time shift playback difference is the
time shown on the playback start time table plus
about ten seconds.
Video RATE
level
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
Dolby Digital
Time shift (min:sec)
5:20
5:00
4:48
4:48
4:48
4:00
4:00
4:00
4:00
3:20
3:12
3:00
3:00
2:40
2:30
2:24
2:24
2:08
2:08
2:00
1:40
1:36
1:30
1:30
1:20
1:20
1:12
1:12
1:04
1:00
1:00
1:00
L-PCM
Time shift (min:sec)
2:40
2:40
2:40
2:40
2:30
2:30
2:24
2:08
2:08
2:08
2:00
2:00
1:40
1:40
1:40
1:40
1:40
1:36
1:30
1:20
1:20
1:12
1:12
1:04
1:04
1:04
1:00
1:00
1:00
1:00
1:00
1:00
Playback Monitoring during Recording
If time shift playback is enabled on the Function
Menu (SET UP section = [Operation] = [HDD
Recording] = [Time Shift PLAY]), the PLAY button
responds when recording is being made to the hard
disk drive. Pressing the PLAY button allows the
user to monitor images recorded immediately
before.
SET UP section = [Operation] = [HDD Recording]
= [Time Shift Play]
Playback may be started within the range 60-320
seconds after beginning recording
(Note 1)
. Basic
operations are enabled during playback of the
previously recorded images. The playback start
position is the same as the recording start position,
and the range of possible playback is within 60-320
seconds prior to the current recording point. During
playback monitoring, the REC and PLAY buttons
light, and during pause mode, the PAUSE button
also lights.
If the STOP button is pressed during playback,
playback monitoring stops and the screen display
returns to show the point currently being recorded.
Press the STOP button again to end the recording
as well.