Filter
Top Products
Chapter 2: System Setup
2-14
To rename using Sonos Controller
1. From the Music menu, select System Settings>ZonePlayer Settings and press
OK. If you wish to change the name of a ZoneBridge, select ZoneBridge Settings
instead.
2. Use the scroll wheel to highlight the zone you wish to change, and press OK.
3. Select ZonePlayer Name, and press OK.
4. Choose one of the following options:
• Use the scroll wheel to select a new name from the list, and then press OK.
Or,
• Type a different name by selecting Enter New.
• Use the scroll wheel to select each letter, pressing OK after each entry.
• Press Accept to accept the new name, or press Cancel to leave the screen
without making a change.
Turning Off White Status Indicator
If you have a ZonePlayer located in a bedroom, you may want to turn off the Status
Indicator Light located on the front of the ZonePlayer. When the ZonePlayer is in
normal operation, the white light will not display. However, if the ZonePlayer status
indicator begins to flash amber, see "ZonePlayer Status Indicator Explanations" on
page A-10for additional information.
To turn off using Desktop Controller software
1. From the Zones menu, click ZonePlayer Settings. If you wish to turn off a
ZoneBridge status indicator light, select ZoneBridge Settings instead.
2. Highlight the ZonePlayer/ZoneBridge you wish to adjust, and click Settings.
ZonePlayer Status Indicator
Light; white when in normal
operation