Filter
Top Products
Sonos Digital Music System User GuideA-2
Using your Desktop Controller:
1. From the Music menu, select Set Up Music Library.
2. Select the music folder(s) stored on this computer, and click Remove.
3. Next, re-add the share by selecting Add a Share.
4. Select Add music stored on this computer and click Next.
5. Select the music folder you just removed, and click Next.
6. Click Finish.
ZonePlayer or ZoneBridge not detected during setup
Which CD-ROM did you use to install the ZoneBridge? If you did not use the CD-ROM
packaged with your ZoneBridge, insert that CD-ROM and follow the prompts to set up
your ZoneBridge.
A network problem may be preventing the ZonePlayer from associating with the
Desktop Controller software. If this is a wireless ZonePlayer, try moving the ZonePlayers
closer together, or wire the ZonePlayer temporarily to see if the problem is related to
wireless interference.
If you encounter this message on the first wired ZonePlayer, you can try the steps
below to resolve this issue:
1. Check Firewall
Firewall software installed on the computer may be blocking the ports that Sonos uses
to operate. The first step is to disable all your firewalls and try to connect again. If this
resolves the problem, then configure your firewall to work with the Sonos music
system. Click "Firewall Information" on page 6-9 for help with this step. If this does not
resolve the problem, go on to step 2.