74
Using Play List: Creating Play Lists
Creating Play Lists
The workflow for creating a play list is given below. A play list can be up to 24 hours long.
This section describes how to delete a play list stored in the
play list area of this unit and how to prepare a new play list.
1 Select an edit format in the setup menu.
•Select an edit format. The unit will then be able to play
back only the selected format.
•Select playback channels for added audio.
◆ NOTE:
The settings in the following setup menus and play list menu
determine the edit format.
•25 SYSTEM FREQ (➝Refer to page 119.)
•020 SYS FORMAT (➝Refer to page 121.)
•024 REC FMT(SD) (➝Refer to page 121.)
•025 REC FMT (HD) (➝Refer to page 121.)
*1
•026 PLY LST FMT (➝Refer to page 122.)
*1 The following setup menu determines voice over settings only
when an AJ-YBX200G AVC-Intra codec board (optional
board) is installed.
•792 A DUB CH (➝Refer to page 137.)
•793 A DUB PB MIX (➝Refer to page 137.)
2 Open the play list screen.
3 Press the MENU button.
4 Use the cursor buttons to choose [SETTING] –
[INSERT MODE] and press the SET button.
This selects INSERT and engages the insert edit mode.
5 Use the cursor buttons to choose [FILE] – [NEW].
◆ NOTE:
Holding down the SHIFT button and pressing the RESET button
performs the same function as [FILE] – [NEW].
6 Select [YES] and press the SET button.
This deletes the open play list and displays a new play list
without any events.
◆ NOTE:
• Be sure to choose [FILE] – [NEW] after changing the edit format
in the setup menu. Otherwise the edit format does not change.
Preparing new play lists
↓
Registering events and adding existing play lists
↓
Saving play lists
Preparing New Play Lists
3
4
2
5