Filter
Top Products
Setup: Item Settings
125
Setup
This menu allows you to set method for engaging search dial operations, maximum shuttle speed operation, maximum speed
of FF and REW operation, NEXT and PREV seek operations, display of warning messages when REF.VIDEO is not connected,
PLAY delay time, battery type, display of warnings when power is too low, voltage when the power supply is turned off.
* An underlined setting
indicates an initial value.
OPERATION
Item Setting
Settings and brief function description
FR
No.
SUPER
DISP.
FR
No.
SUPER
DISP.
100 SEARCH ENA
0000
0001
DIAL
KEY
Specifies method for transferring to the search mode (search dial operation).
0: Press the STILL button or turn the search dial to engage search dial operation.
1: Press the STILL button to engage search dial operation.
101 SHTL MAX
0000
0001
0002
0003
0004
×8
×
16
×32
×60
×100
Sets the maximum shuttle speed operation.
0: 8× normal speed
1: 16× normal speed
2: 32× normal speed
3: 60× normal speed
4: 100× normal speed
102 FF.REW MAX
0000
0001
0002
0003
×
32
×60
×100
SEEK
Sets the maximum speed of FF and REW operation.
0: 32× normal speed
1: 60× normal speed
2: 100× normal speed
3: Seek operation to start of clip
NOTE:
• When SEEK is selected, FF and REW operations for FF and REW commands
transferred via 9P and 1394 are performed at 100× normal speed.
• The seek operation is available in playback mode.
103 SEEK SEL
0000
0001
CLIP
CLIP&T
Specifies where a NEXT (SHIFT+FF) and PREV (SHIFT+REW) seek operation moves to.
0: The start of the clip
1: The start of the clip or video text memo
NOTE:
This setting is not available during FF and REW operation.
104 REF ALARM
0000
0001
OFF
ON
Selects whether or not a warning should appear when REF.VIDEO is not connected.
0: Displays no warning
1: Flashes the STOP lamp to warn
108 PLAY DELAY
0000
|
0015
0
|
15
Sets PLAY delay time in frame increments.
122 STOP EE SEL
0000
0001
EE
PB
Specifies whether to invoke the EE mode or playback mode when STOP is pressed.
0: EE mode
1: Playback mode
NOTE:
During IEEE1394 signal input, the EE mode is invoked regardless of this menu setting.