Filter
Top Products
104
Using USB Connectors and SD/SDHC Memory Cards: Connecting a PC to This Unit
Connecting a PC to This Unit
1 Press the PC button when this unit is idle.
2 Select [USB DEVICE] in the confirmation screen and
press the SET button.
“USB DEVICE” flashes on the LCD monitor to indicate that
the unit is entering the USB host mode. After the mode
switch, “USB DEVICE DISCONNECT” appears on the LCD
screen. This message is replaced by a “USB DEVICE
CONNECT” message when the connection with the PC is
completed.
3 Use USB device mode operations.
4 Press the PC button to return to regular mode.
◆ NOTE:
•Recording and playback are not available in the USB device
mode.
•In the play list mode, the PC button is not available during
remote operation.
• In the USB device mode, USB is displayed on the panel and the
VIDEO and AUDIO INPUT SELECT indications disappear.
Switching to USB Device Mode
PC
CONTROL
REMOTE
LOCAL
UNITY
4
2
2 4
UNITY
3
1
1 3
PB
CH
30
10
0
10
20
2/4
CH
1/3
2
1,4
USB HOST
USB DEVICE
CANCEL
㧖