Filter
Top Products
Setup: Unit Setup
115
Setup
Setup
Unit Setup
The settings for this unit consist of SYSTEM, BASIC, OPERATION, INTERFACE, TIME CODE, VIDEO, AUDIO, DIF and MENU.
The SYSTEM setting values are stored in the SYSTEM file. The other setting values are stored in the user setting file. Up to five
user files (USER1 to USER5) can be saved. These settings (up to 4 files) can be written to and loaded from SD memory cards.
This unit can possess up to five user files, each of which can
be selected from a menu setting.
Setting values can be changed as necessary.
➝For details on change operations, refer to “Changing
Settings” (page 116).
After a change, the content of USER1 can be saved (copied)
to USER2 to USER5.
➝For details, refer to “Setup menu No. A01 (SAVE)” (page
139).
SETUP menu settings can be saved to and loaded from an SD
memory card.
➝For details, refer to “Setup menu No. A10 (CARD READ)
(page 139), A11 (CARD WRITE) (page 140)”.
You can specify the user setting files that will be loaded in
USER1 at power up. You can also decide to use the same
settings as last time.
➝For details, refer to “Setup menu No. A02 (P.ON LOAD)”
(page 139).
A10 CARD READ A11 CARD WRITE
SD
memory
card
System Basic
USER1 USER2 USER3 USER4
US
ER
5
USER5
Operation Interface TimeCode Video Audio DIF Menu
User settings file
System
file
SHIFT+FF
SHIFT+FF SHIFT+FF
SHIFT+FF
SHIFT+FF
SHIFT+REW SHIFT+REW
SHIFT+REW
SHIFT+REW SHIFT+REW
Automatic Loading of User Setting File at
Power up