Filter
Top Products
Introduction: Control Reference Guide
25
Introduction
1. Level meter
Indicates the level of audio signals for CH1, CH2, CH3
and CH4.
The input signal level of audio signals is indicated
during recording and when EE is selected. During
playback the meter indicates output signal levels.
Use the METER selector button to switch the audio
level display to FULL mode or FINE mode. Use the
setup menu to change the reference level.
2. Counter display
This function shows the counter and time codes.
It displays CTL (relative position from the beginning),
TC (read time code) and UB (user bit of the read time
code).
3. Format display
Indicates the set record format and the format of video
recorded on an inserted P2 card.
4. TV system display
Indicates the selected TV system. Use the SYSTEM
setting in setup menu No. 25 SYSTEM FREQ to switch
between 59.94 Hz, 50 Hz or other settings.
◆ NOTE:
• When a frequency other than 59.94 Hz and 50 Hz is
selected, also the SYSTEM indicator goes off.
5. INPUT SELECT display
Indicates selected VIDEO and AUDIO status. Except
for analog audio signals, the indicator flashes when
there is no input for the selected signal.
When SDI input is selected, this display flashes if the
input signal is not compatible with the system format.
6. U lamp
In the EE mode, this lamp lights when an input signal
contains UMID information.
Lights during playback when the recording contains
UMID information.
LCD Panel
dB dB dB dB
4
0
-12
-20
-30
-40
3
2
1
0
-1
-2
-3
-4
4
3
2
1
0
-1
-2
-3
-4
L R L R L R L R
HD 50
CTL
TC
UB
-
0
-12
-20
-30
-40
-
DVCPRO
AVC-I
VIDEO
CMPST
SDI
1394SG
AUDIO
ANALOG
SDI
1394SG
SYSTEM
59.9450
1080i720p
U
1
2
6
5
4
3
dB
4
3
2
1
0
-1
-2
-3
-4
LR
dB
0
-12
-20
-30
-40
LR
FULL modeFINE mode
Reference level
59.94:
Lights when a 59.94 Hz system frequency is selected.
50:
Lights when a 50 Hz system frequency is selected.
VIDEO
CMPST: Analog composite video input signals
SDI: Serial digital video input signals
1394: IEEE1394 input signals
SG: Internal reference signals
AUDIO
ANALOG: Analog audio input signals
SDI: Serial digital audio input signals
1394: IEEE1394 input signals
SG: Internal reference signals