Filter
Top Products
Setup: Item Settings
129
Setup
507 EXT TC SEL
0000
0001
0002
EXT_L
SLTC
SVITC
Specifies the time code used when an external time code is used.
0: LTC of the TIME CODE IN connector
1: LTC data attached to serial signal input to HD SDI IN
2: VITC data attached to serial signal input to HD SDI IN
NOTE:
When SLTC and SVITC are set, the VITC in the input video signal is used when an
analog composite or SD SDI input signal is selected. When 1394 is selected as the
input signal, the IEEE 1394 digital input signal time code is used regardless of this
setting.
508 BINARY GP
0000
0001
0002
0003
0004
0005
0006
0007
000
001
010
011
100
101
110
111
Specifies user bit usage in time code generated by the TCG.
0: NOT SPECIFIED (character set not specified)
1: ISO CHARACTER (8-bit character set complying with ISO646 and ISO2022)
2: UNASSIGNED 1 (undefined)
3: UNASSIGNED 2 (undefined)
4: UNASSIGNED 3 (undefined)
5: PAGE/LINE
6: UNASSIGNED 4 (undefined)
7: UNASSIGNED 5 (undefined)
509 PHASE CORR
0000
0001
OFF
ON
Specifies whether or not LTC output from the TIME CODE OUT connector should be
phase controlled.
0: No phase control
1: Phase controlled
510 TCG CF FLAG
0000
0001
OFF
ON
Sets the TCG CF flag.
0: OFF
1: ON
511 DF MODE
0000
0001
DF
NDF
Sets the DF or NDF mode for CTL and TCG.
0: Uses drop frame mode.
1: Uses non-drop frame mode.
512 TC OUT REF
0000
0001
VOUT
TC_IN
Specifies how the phase is switched for the time code output by the TIME CODE OUT
connector for the external LTC input when the TC INT/EXT switch is set to EXT. (only in EE
mode)
0: Synchronized with output video signal.
1: Synchronized with the external time code input.
513 VITC OUT
0000
0001
SBC
VAUX
Specifies how to output VITC that will be superimposed on the SD output video signal.
0: Outputs the time code recorded in the SBC area as VITC
1: Outputs the time code recorded in the VAUX area as VITC
NOTE:
• VITC data detected in the input video signal is automatically recorded in the VAUX
area during video recording.
514 HD EMBD VITC
0000
0001
OFF
ON
Specifies whether or not VITC data will be superimposed on HD SDI output.
0: Not superimposed
1: Superimposed
515 HD EMBD LTC
0000
0001
OFF
ON
Specifies whether or not LTC data will be superimposed on HD SDI output.
0: Not superimposed
1: Superimposed
Item Setting
Settings and brief function description
FR
No.
SUPER
DISP.
FR
No.
SUPER
DISP.
59.94Hz 50Hz
only
59.94Hz 50Hz
only
59.94Hz 50Hz 29.97Hz 25Hz 60-25Hz
only
59.94Hz 29.97Hz
only
59.94Hz 50Hz
only