Filter
Top Products
156
For Long and Trouble-Free Operation: Error Messages
The following warning messages appear when an incorrect operation is attempted in the thumbnail play list screen.
Item Message Description Measure
Thumbnails
CANNOT ACCESS! Data cannot be accessed because it is corrupted
or for other reasons.
Restore media and clips to normal state before
access.
WRITE PROTECTED! The P2 or SD memory card is write protected. Insert write-enabled media.
CARD FULL! The P2 or SD memory card is full. Insert media with sufficient capacity.
NO CARD! No P2 or SD memory card is inserted. Insert compatible media.
CANNOT DELETE! Contents version mismatch prevents deletion. Match devices and contents version.
UNKNOWN
CONTENTS
FORMAT!
Warning displayed to indicate contents version
mismatch.
Match devices and contents version.
CANNOT FORMAT! P2 card problem prevents formatting. Check P2 card.
CANNOT REPAIR! Selected content cannot be repaired. Check selected content.
CANNOT
RE-CONNECT!
A clip that does not span multiple cannot be
reconnected.
Check selected content.
NO INPUT! No data is input. Set after making input.
INVALID VALUE! Entered data was invalid. Enter data in a valid range.
UNKNOWN DATA! The metadata character code is invalid. Use UTF-8 for the metadata character code. Use the
viewer to enter correct characters.
CANNOT REPAIR IN
SELECTION!
Some of the selected clip could not be repaired.
NO SD CARD! No SD memory card is inserted. Insert an SD memory card.
NO COPY TO SAME
CARD!
A clip cannot be copied to the card storing the
original clip.
Copy the selected clip to a card that does not
contain the original clip.
SAME CLIP IS
SELECTED!
The selected clips contain multiple copies of the
same clip (duplicated using COPY).
Multiple copies of the same clip (duplicated using
COPY) cannot be simultaneously copied. Deselect
all identical copies from the selected clips.
USER CLIP NAME
MODIFIED!
Characters in the clip name had to be deleted in
adding the counter value.
The user clip name plus the counter value can only
contain up to 100 bytes. Characters in the clip name
are automatically deleted when the total exceeds
100 bytes.
TOO MANY CLIPS! Too many clips are selected. Reduce the number of selected clips.
LACK OF REC
CAPACITY!
There is not enough recording capacity left on the
card.
Insert a card with sufficient recording capacity.
CANNOT CHANGE! A thumbnail containing a grayed out text memo
that cannot be generated is not available for
editing.
Edit settings or content to enable thumbnail display.
NOT SELECTED! An attempt was made to delete an unselected
clip.
Select the clip you want to delete.
MISSING CLIP! All cards that contain the clip must be inserted to
allow attachment of markers.
Insert all cards that contain the clip.