Filter
Top Products
136
Setup: Item Settings
708 CH3 OUT LV
0000
0001
0002
0003
4dB
0dB
–3dB
–20dB
Specifies the standard level for audio output (CH3).
709 CH4 OUT LV
0000
0001
0002
0003
4dB
0dB
–3dB
–20dB
Specifies the standard level for audio output (CH4).
725 REC CH1
0000
0001
0002
0003
0004
0005
CH1
CH2
CH3
CH4
CH1+2
CH3+4
Specifies the input signal to be recorded on the audio CH1.
0: Audio input CH1 signal
1: Audio input CH2 signal
2: Audio input CH3 signal
3: Audio input CH4 signal
4: Mixed audio input CH1 and CH2 signal
5: Mixed audio input CH3 and CH4 signal
726 REC CH2
0000
0001
0002
0003
0004
0005
CH1
CH2
CH3
CH4
CH1+2
CH3+4
Specifies the input signal to be recorded on the audio CH2.
0: Audio input CH1 signal
1: Audio input CH2 signal
2: Audio input CH3 signal
3: Audio input CH4 signal
4: Mixed audio input CH1 and CH2 signal
5: Mixed audio input CH3 and CH4 signal
727 REC CH3
0000
0001
0002
0003
0004
0005
CH1
CH2
CH3
CH4
CH1+2
CH3+4
Specifies the input signal to be recorded on the audio CH3.
0: Audio input CH1 signal
1: Audio input CH2 signal
2: Audio input CH3 signal
3: Audio input CH4 signal
4: Mixed audio input CH1 and CH2 signal
5: Mixed audio input CH3 and CH4 signal
728 REC CH4
0000
0001
0002
0003
0004
0005
CH1
CH2
CH3
CH4
CH1+2
CH3+4
Specifies the input signal to be recorded on the audio CH4.
0: Audio input CH1 signal
1: Audio input CH2 signal
2: Audio input CH3 signal
3: Audio input CH4 signal
4: Mixed audio input CH1 and CH2 signal
5: Mixed audio input CH3 and CH4 signal
731 PB FADE
0000
0001
AUTO
CUT
Specifies audio processing to be performed between clips and edit points created using
play list or edit copy.
0: Depends on recording status. (Refer to the section “Audio V Fade Function” (page
149).)
1: Forcible cut.
NOTE:
The IEEE1394 connector output is forcibly cut also in the AUTO setting.
732 EMBEDDED AUD
0000
0001
OFF
ON
Specifies whether or not audio data will be superimposed on HD SDI output and SD SDI
output.
0: Audio data is not superimposed.
1: Audio data is superimposed.
775 25M REC CH
0000
0001
2CH
4CH
Specifies the number of audio channels that will be used for DVCPRO (25 Mbps) or DV
(25 Mbps) recording.
0: Does not supply microphone current.
1: Records on four channels.
NOTE:
DVCPRO HD, AVC-Intra50 (option) and AVC-Intra100 (option) always record on 8
channels, and DVCPRO50 always records on 4 channels.
Item Setting
Settings and brief function description
FR
No.
SUPER
DISP.
FR
No.
SUPER
DISP.
59.94Hz 50Hz
only