Filter
Top Products
44
Clip Management: Thumbnail and Clip Management
Instead of , appears to indicate that a clip is not
in the P2 standard format.
16. P2 card slot number and hard disk drive status
P2 card and USB hard disk drive status is indicated as
described below.
17.Status message
Shows messages indicating processing status. For
example, screen updating shows an [UPDATING] text
message and a rotating icon.
-
(white)
The number of the P2 card slot that
contains a P2 card is indicated in white.
-
(yellow)
The number of the P2 card slot of the P2
card that contains the clip at the cursor
position is indicated in yellow. When a
clip spans multiple P2 cards, the
numbers of all the slots housing cards
that contain the clip are indicated.
◆ NOTE:
The pink frame indicates either of the following
conditions for an inserted P2 card.
• [RUN DOWN CARD]
The card has been overwritten the maximum
number of times.
• [DIR ENTRY NG CARD]
Directory structure does not conform to
standard specifications.
(gray)
Gray indicates that the USB host mode is
not engaged or that it is but no hard disk
drive is connected.
(white)
White indicates that the USB host mode is
engaged and that the hard disk drive is
available.
(yellow)
Yellow indicates that the USB host mode
is engaged and that clips on the hard
disk drive appears as thumbnails.
(red)
Red indicates that the USB host mode is
engaged and that the hard disk drive
does not permit copying.
X ?
1 23456
P2
HDD
11 6166
1 6166
W