Filter
Top Products
134
Setup: Item Settings
684 EDH(SD)
0000
0001
OFF
ON
Specifies whether or not EDH is superimposed on SDI OUT signals.
0: Signals are not superimposed.
1: Signals are superimposed.
685 ESR MODE(SD)
0000
0001
OFF
AUTO
Specifies the operating mode for edge subcarrier reduction (ESR) in the playback circuit.
0: ESR is forcibly set to off.
1: ESR is automatically turned on and off depending on operating mode.
688 CC REC
0000
0001
OFF
ON
Specifies whether or not the closed caption signal that is superimposed on the SD SDI
and analog composite input signals will be recorded.
0: Not recorded.
The EE output is also blanked.
1: A closed caption signal that is superimposed on an input signal is recorded.
NOTE:
• When 1394 is selected as the input signal, the closed caption signal superimposed
on the compressed input signal is recorded in its original form regardless of settings
in this menu.
689 COMP MODE
0000
0001
NORMAL
DARK
Selects the compression method used during video recording.
0: Records using normal compression processing.
1: Records video suppressing compression video distortion that is generated by dark
areas that are about 10 IRE (70 mV) or less.
NOTE:
This setting is available in DVCPRO HD 720p mode recording.
690 UMID REC
0000
0001
OFF
ON
Specifies whether or not UMID data should be recorded.
0: UMID data is not recorded.
1: Recorded.
691 UMID GEN
0000
0001
INT
EXT
Specifies the generation method of UMID information that is recorded when menu No.
690 UMID REC is set to on.
0: Newly created UMID information is always recorded.
1: Records UMID data superimposed on the input signal.
Newly created UMID information is recorded when not superimposed on an input
signal.
692 UMID POS
0000
0001
:
0006
:
0008
BLANK
12L
:
17L
:
19L
Specifies the line that superimposes UMID data.
NOTE:
• You cannot select the same line as in menu No. 501 VITC POS-1 and No. 502
VITCPOS-2.
• Holding down the SHIFT button and pressing the RESET button will not restore the
factory defaults.
• UMID data is output before recorded VANC data. To output VANC data, set UMID
POS to a line other than that which superimposed the data or select “BLANK.”
• During playback of DVCPRO HD native clip, UMID becomes NO-INFO.
Item Setting
Settings and brief function description
FR
No.
SUPER
DISP.
FR
No.
SUPER
DISP.
59.94Hz 50Hz 29.97Hz 25Hz 60-25Hz
only
59.94Hz 29.97Hz
only
59.94Hz
only
59.94Hz 50Hz 29.97Hz 59-23Hz 60-24Hz 25Hz
60-25Hz
only