Filter
Top Products
126
Setup: Item Settings
155 AUTO REC
0000
0001
0002
OFF
TYPE1
TYPE2
Select whether recording and stopping should be performed automatically according to
the Recording Marks in the HD SDI input signals from Panasonic camera-recorders.
0: No automatic recording/stopping
1: Recording and stopping is performed automatically according to the Recording Marks
in the LTC information attached to HD SDI signals.
2: Recording and stopping is performed automatically according to the Recording Marks
in the SVITC information attached to HD SDI signals.
NOTE:
• Set the CONTROL switch to REMOTE. Refer to “Panasonic camera-recorders,
recording formats and Recording Mark” on the next page before selecting TYPE1 or
TYPE2.
• Select TYPE1 or TYPE2. To start automatic recording, simultaneously press the REC
button and the STILL button to place this unit in the REC PAUSE mode. This function
will not work in any mode other than REC PAUSE. The unit returns to REC PAUSE
mode when automatic stop is activated.
• In normal recording mode, this setting is not available and auto stop is not activated.
160 REPEAT PLAY
0000
0001
OFF
ON
Determines whether or not to engage repeat play during playback.
0: Does not engage repeat play. Stops playback at the end of the last clip.
1: Engages repeat play. Continues playback from the beginning when reaching the end
of the last clip.
NOTE:
• Repeat play is not available when the PLAYLIST button is on and during TEXT MEMO
playback.
• If the P2 card is removed during repeat play, playback is suspended when playback
reaches the clip that is no longer exists.
• Even if you insert a P2 card during repeat play, additional clips are not played back
until you once stop repeat play and resume it.
180 BATTERY SEL
0000
0001
0002
0003
0004
0005
0006
NiCd12
NiCd13
NiCd14
S-LION
I-LION
TYPE-A
TYPE-B
Sets the battery type.
0: Settings for 1 pc. 12 V battery (NEAR: 11.2 V, END: 10.6 V)
1: Settings for 1 pc. 13 V battery (NEAR: 12.0 V, END: 10.6 V)
2: Settings for 1 pc. 14 V battery (NEAR: 13.6 V, END: 10.6 V)
3: Settings for 1 pc. lithium-ion battery (BP-L90A) (NEAR: 11.0 V, END: 10.6 V)
4: Settings for 1 pc. lithium-ion battery (ENDURA80) (NEAR: 13.4 V, END: 10.6 V)
5: Battery specified by menu No. 181 TYPE-A NEAR item and No. 182 TYPE-A END item
6: Battery specified by menu No. 183 TYPE-B NEAR item and No. 184 TYPE-B END item
181 TYPE-A NEAR
0000
|
0023
|
0044
10.6
|
12.9
|
15.0
Specifies the voltage (in 0.1 V steps) when the counter display will flash to warn that the
voltage of a TYPE-A battery selected in menu No. 180 BATTERY SEL item has dropped.
NOTE:
• When a setting is made in the vicinity of 15.0 V, the counter display may flash also
when AC power is used.
• A setting that is smaller than END cannot be made.
182 TYPE-A END
0000
|
0018
|
0034
10.6
|
12.4
|
14.0
Specifies the voltage (in 0.1 V steps) when this unit will automatically power off because
the voltage of a TYPE-A battery selected in menu No. 180 BATTERY SEL item has
dropped.
NOTE:
A setting that is larger than NEAR cannot be made.
183 TYPE-B NEAR
0000
|
0023
|
0044
10.6
|
12.9
|
15.0
Specifies the voltage (in 0.1 V steps) when the counter display will flash to warn that the
voltage of a TYPE-B battery selected in menu No. 180 BATTERY SEL item has dropped.
NOTE:
• When a setting is made in the vicinity of 15.0 V, the counter display may flash also
when AC power is used.
• A setting that is smaller than END cannot be made.
Item Setting
Settings and brief function description
FR
No.
SUPER
DISP.
FR
No.
SUPER
DISP.